Male,6mm,90,Compression,Outer,RFS,skasifiqbal.com,Brass,$13,Industrial Scientific , Hydraulics, Pneumatics Plumbin , Fittings,Fitting,,Di,Degree,/levulosuria922673.html,Elbow RFS Brass 90 Degree Male shipfree Elbow 6mm Outer Di Fitting Compression RFS Brass 90 Degree Male shipfree Elbow 6mm Outer Di Fitting Compression $13 RFS Brass 90 Degree Male Elbow Compression Fitting, 6mm Outer Di Industrial Scientific Hydraulics, Pneumatics Plumbin Fittings $13 RFS Brass 90 Degree Male Elbow Compression Fitting, 6mm Outer Di Industrial Scientific Hydraulics, Pneumatics Plumbin Fittings Male,6mm,90,Compression,Outer,RFS,skasifiqbal.com,Brass,$13,Industrial Scientific , Hydraulics, Pneumatics Plumbin , Fittings,Fitting,,Di,Degree,/levulosuria922673.html,Elbow

RFS Brass 90 Degree Male shipfree Elbow 6mm Outer Di Fitting Compression Inexpensive

RFS Brass 90 Degree Male Elbow Compression Fitting, 6mm Outer Di

$13

RFS Brass 90 Degree Male Elbow Compression Fitting, 6mm Outer Di

|||

Product Description

elbow fitting to combine pipes and tubes at an angleelbow fitting to combine pipes and tubes at an angle

To install a compression fitting, kindly refer to the steps below;

  • Step 1: Place the ring and nut over the tube.
  • Step 2: Use a pre-assembly tool and insert the tube up to the tube abutment and tighten it with 1 1/4 turns.
  • Step 3:Remove the pre-assembly tool and untighten it.
  • Step 4: Remove the nut to see if there is any visible ring formed over the tube.
  • Step 5: Use a wrench to tighten the nut with the fitting body in an upward position until there is a noticeable feeling in an increase of torque.
  • Step 6: Further tighten the nut 1/4 turn.

Our compression fittings are available in 3 series; S, L, and LL. Each series is made to suit different pressure needs.

  • S series (high pressure) fittings have a working pressure of 315 to 630 bars.
  • L series (light pressure) fittings have a working pressure between 160 to 315 bars.
  • The lowest pressure (LL) series is 100 bars.

Product Specifications

Product Type DIN 2353 90 degree male elbow.
Connection Type 1 compression end and 1 male threaded NPT end.
Size Range From 6MM x 1/8"NPT to 25MM x 1"NPT size.
Material Made of brass material.
Working Temperature The allowable working temperature for brass material is between -60°C to +175°C.
Working Pressure Depending on the series, the maximum pressure rating for L series is 7200 PSI (500 Bar) while S series is 11000 PSI (800 Bar).
Usage Single ferrule 90-degree male elbow compression fitting combines pipes together at a 90-degree angle.

RFS Brass 90 Degree Male Elbow Compression Fitting, 6mm Outer Di

Support The Moscow Times!

Duma Elections 2021

Russia Votes

Coronavirus Cases in Russia

7,140,070 Total Confirmed Cases
557,664 Total Active Cases
0 Today's Cases
6,389,657 Total Recovered
2,300 Total Critical
0 Today's Deaths
192,749 Total Deaths
48,901 Cases per Million
1,320 Deaths per Million
Data Sources: Worldometer, Johns Hopkins

highlights

Combatting the contagion

Russia Fights Coronavirus

Meanwhile in Russia