$14 RFS Brass 90 Degree Elbow Compression Fitting, 8L Compression En Industrial Scientific Hydraulics, Pneumatics Plumbin Fittings Compression,Compression,/intimidatory922737.html,Elbow,skasifiqbal.com,Industrial Scientific , Hydraulics, Pneumatics Plumbin , Fittings,90,Degree,$14,Fitting,,8L,Brass,RFS,En Compression,Compression,/intimidatory922737.html,Elbow,skasifiqbal.com,Industrial Scientific , Hydraulics, Pneumatics Plumbin , Fittings,90,Degree,$14,Fitting,,8L,Brass,RFS,En RFS Brass 90 Degree Free Shipping New Elbow En Fitting Compression 8L $14 RFS Brass 90 Degree Elbow Compression Fitting, 8L Compression En Industrial Scientific Hydraulics, Pneumatics Plumbin Fittings RFS Brass 90 Degree Free Shipping New Elbow En Fitting Compression 8L

RFS Brass 90 Degree Free Shipping Rapid rise New Elbow En Fitting Compression 8L

RFS Brass 90 Degree Elbow Compression Fitting, 8L Compression En

$14

RFS Brass 90 Degree Elbow Compression Fitting, 8L Compression En

|||

Product Description

elbow fitting to combine pipes and tubes from three direction togetherelbow fitting to combine pipes and tubes from three direction together

To install a compression fitting, kindly refer to the steps below;

  • Step 1: Place the ring and nut over the tube.
  • Step 2: Use a pre-assembly tool and insert the tube up to the tube abutment and tighten it with 1 1/4 turns.
  • Step 3:Remove the pre-assembly tool and untighten it.
  • Step 4: Remove the nut to see if there is any visible ring formed over the tube.
  • Step 5: Use a wrench to tighten the nut with the fitting body in an upward position until there is a noticeable feeling in an increase of torque.
  • Step 6: Further tighten the nut 1/4 turn.

Our compression fittings are available in 3 series; S, L, and LL. Each series is made to suit different pressure needs.

  • S series (high pressure) fittings have a working pressure of 315 to 630 bars.
  • L series (light pressure) fittings have a working pressure between 160 to 315 bars.
  • The lowest pressure (LL) series is 100 bars.

Product Specifications

Product Type DIN 2353 90 degree elbow.
Connection Type 2 compression ends.
Size Range From 6MM to 42MM outer diameter tube size.
Material Made of brass material.
Working Temperature The allowable working temperature for brass material is between -60°C to +175°C.
Working Pressure Depending on the series, the maximum pressure rating for L series is 7200 PSI (500 Bar) while S series is 11000 PSI (800 Bar).
Usage Single ferrule 90-degree elbow compression fitting combines pipes together at a 90-degree angle.

RFS Brass 90 Degree Elbow Compression Fitting, 8L Compression En

Follow Us:
Monday, September 13, 2021